Free appliance repair scheduling software that gets you the model number before you drive

Half the wasted visits in appliance repair are one missing fact: what machine it actually is. Picktime charges the call-out through PayPal at the moment the slot is taken, holds every machine you have been to against the address, and books the return visit for when the part lands rather than leaving it on a card in the van. Asking for the make and the model on the booking form is on the paid plans.

  • Free forever plan
  • Your own booking page
  • No card required
An engineer kneeling at a washing machine pulled out from under the counter, drum door open and tools on the floor, the customer looking on

Blu RepairsBook online

Washer repair1h · Call-out$96.00

Oven diagnosis45m · Call-out$60.00

Return visitWhen the part landsBook

Next free8:30 AM11:00 AM2:30 PM

Model number

Answered

Before anybody drives

Call-out

$60.00

Taken when the slot is

Job length

2h held

An integrated oven, not a plug swap

How it works for you

Built for a visit that fails without one piece of information

Everything here is about arriving with the right part, and being paid for turning up even when you cannot fix it that day.

Each appliance and each job at its own length

A washing machine is not an integrated oven and a diagnosis is not a repair. Put them on the page separately with their own lengths and prices so the slot you sold is the slot the job needs.

The Blu Repairs booking page: a washer repair, an oven diagnosis and an integrated oven repair each listed at its own length, with their prices

Make, model and fault asked at booking

Your own questions on the booking form are on the paid plans: the model plate, how old it is, what it is doing, integrated or freestanding. The answers arrive with the booking, so the part is on the van instead of on order.

A washer repair booked with your own questions answered on the booking form: make Bosch, model WAT28371GB read off the rating plate, freestanding, leaking at the door

The call-out charged when the visit is booked

Take the diagnostic fee through PayPal on the free plan, or through Stripe or Square on the paid ones, at the moment the slot is taken, with the repair invoiced afterwards. You are paid for the hour whether or not the machine turns out to be worth fixing.

A $60.00 call-out for an oven diagnosis paid through PayPal as the slot was booked, with the repair itself left to be invoiced after the visit

The return visit booked before you leave the kitchen

A second visit for the part goes into the calendar there and then, held against the same customer with the machine and the fault already recorded, and the confirmation goes out as you book it. A reminder before the day itself is on the paid plans.

A return visit for Friday, November 13 at 14:00 booked against the same customer, with the washer and the door seal on order already on the record, and the confirmation sent as it was booked
More than one engineer

Gas hobs, integrated ovens and washing machines are three different people

Small repair firms specialise without meaning to: one person will not touch gas, one is the only one who will pull out an integrated oven, one does laundry and dishwashers all week. Give each engineer their own hours, their own days off and only the appliances they work on, so the page never sells a gas hob to a day when nobody can legally work on it. Everything anybody is booked into sits on one colour-coded week.

Three engineers on one colour-coded week, each with their own days and only the appliances they work on, so a gas hob is not offered on Friday when the registered engineer is off
After the repair

The invoice comes off the booking, with the model on it

A repair invoice that does not name the machine is an invoice you will be arguing about in six weeks when the same fault comes back. Every booking already holds the make, the model, the fault the customer described and the price, so the invoice comes off that record rather than off memory: Paid, Unpaid, Overdue or Refunded against it, downloadable as a PDF, and chaseable with a reminder when a landlord has quietly forgotten.

The Blu Repairs invoices marked Paid, Unpaid, Overdue and Refunded, a washer repair invoiced from its booking, and the overdue landlord invoice chased with a reminder carrying the PDF
Thursday, 3:20pm

Two hours of driving for a part you could have brought

Twenty past three, second visit of the day, and it is a door seal: a twenty-minute job and a part that costs very little, sitting in a wholesaler four miles away and not on the van because nobody knew what machine it was. The booking said “washing machine, leaking”, which is every washing machine.

So the visit becomes two visits, the second one is unpaid in the customer’s mind, and it has to be arranged all over again. Picktime asks for the make, the model and the fault before the slot is confirmed, and books the return there and then if one is still needed.

Getting started

Bookable by this evening

A diagnostic visit, a washer repair, an integrated oven repair and a dishwasher repair set up as separate services, each with its own length
01

Split diagnosis from repair, and appliance from appliance

A diagnostic visit, a washer repair, an integrated oven, a dishwasher. Own lengths and own prices, so the page stops selling forty-five minutes of a two-hour job.

A required booking question being typed for the model from the rating plate, alongside make, age, integrated or freestanding, and what it is doing
02

Make the model number a required question

Make, model from the plate, age, integrated or freestanding, what it is doing. Your own booking questions are on the paid plans, and they are the single change that turns two visits back into one.

PayPal connected so the $60.00 call-out is taken at booking, and the booking link added to the website, the Google profile and the card left behind, and a diagnostic visit booked with its call-out paid
03

Set the call-out to take payment

Connect PayPal, or Stripe or Square on a paid plan, so the diagnostic fee is taken when the slot is taken. Then put the booking link on your website, your Google profile and the card you leave behind.

AI receptionist

The call that comes while you are behind a fridge

Appliance repair enquiries arrive at the exact moment something has flooded a kitchen floor, and there is nobody in the office to take them. Picktime’s AI receptionist answers on a number of its own, day and night and on several calls at once, takes the caller’s name, number and address, walks them through the repairs you take bookings for and books one into your calendar, then hands over to you if they would rather have a person. Every call is transcribed, so a model number read out over the phone is written down instead of remembered.

A late-evening call about a leaking washing machine, the caller’s name, number and address taken and a washer repair booked by the AI receptionist, with the model number written into the transcript
What it costs

Free forever. You pay when there are more engineers, not more machines.

The free plan is a plan, not a trial. There is no date at which it stops, no card to add, and nothing that quietly turns off in a fortnight.

Free, and it stays free

What a one-van repair business gets without paying

  • Your own booking page, priced per appliance and per job
  • Customers book, move and cancel their own visits
  • A confirmation by email the moment a visit is booked
  • Every machine and every past repair against the address

Start free

Works with what you use

It fits the calendar, the call-out fee and the profile found when a machine stops

One diary, not a windscreen full of cards

A visit lands in the Google or Outlook calendar already on your phone, and the paid plans sync it both ways, so a morning blocked out there is never sold here. The call-out fee runs through PayPal at the moment of booking, or through Stripe or Square on a paid plan, and the booking link goes on the Google Business profile somebody finds when their machine has stopped.

It runs from the van

Picktime opens in a browser on a phone as well as a laptop, and there are iOS and Android apps, so the model number and the fault are readable at the wholesaler counter rather than at home on a laptop.

Why appliance repair businesses choose Picktime

Picktime is free appliance repair scheduling software for a business that already has enough to manage without its booking system adding to it.

It reduces the scheduling workload by taking bookings online, organising engineers’ schedules and keeping customer details in one place, so instead of juggling phone calls, paperwork and last-minute changes the routine parts happen on their own while you concentrate on the repairs. Appointments, team schedules and payments stay aligned in one place, and when customers book through the page you get control of your own day.

Show every repair service you offer and let customers book at any hour, day or night, and assign different permission levels so each person has access to exactly what they need. Give the booking page a professional look with theme colours, a background image, clear descriptions and prices shown up front, plus your logo and service images.

Get a QR code to place near the shop, run every booking from one account, receive and track customer payments, and check the day’s bookings on a smartphone.

The paid plans add extra fields on the booking form, so the details that make a visit work arrive with the booking, and a separate booking page link and QR code for each service.

Questions

Appliance repair scheduling: common questions

What is the best software for appliance repair businesses?

It depends whether you need a full field platform or a booking system. Picktime covers the booking half (the page, the call-out fee, the return visit) free for a one-van business, with your own booking questions and reminders on the paid plans.

Is there free appliance repair scheduling software?

Yes. Picktime’s free plan gives you your own booking page, an online calendar, customers who book and move their own visits, and email notifications, with no card and no end date. Your own booking questions and reminders sit on the paid plans.

Can I make customers give me the model number when they book?

Yes, on the paid plans. Add make, model, age and fault as questions on the booking form, and the answers arrive attached to the booking, which is usually the difference between one visit and two.

Can I charge a call-out fee when the appointment is made?

Yes. Connect PayPal on the free plan, or Stripe or Square on a paid one, and take the diagnostic fee at the moment the slot is taken, with the repair itself invoiced afterwards. You are paid for the hour either way.

How do I book the second visit when a part is on order?

Book it while you are still there. It goes into the calendar against the same customer, with the machine and the fault already on the record, and the confirmation goes out as you book it. A reminder before the day itself is on the paid plans.

Can I stop gas work being booked to the wrong engineer?

Yes. Each engineer has their own hours and only the appliances they work on, so a gas hob is only ever offered on the days somebody registered is available. Certified work splits the same way for an electrician booking inspections and consumer units, where the person who signs the certificate is the one who has to be free.

Can I invoice from the repair?

Yes. The invoice comes off the booking record, so the machine, the fault and the price carry across. It shows as Paid, Unpaid, Overdue or Refunded, downloads as a PDF and can be chased with a reminder.

Turn two visits back into one

Free forever for a one-van repair business. No card, no trial clock, and the model number can be arriving with your bookings tonight.